Show only results for:












Setup Renderserver

Requirements

Hardware Requirements (Per Stream)

  • Windows Server/Workstation
  • 2 GB VRAM
  • 4 GB RAM
  • 2 CPU cores
  • GPU Recommendations:
    • NVIDIA GPUs such as RTX 5000 or A4500 are recommended.
    • AMD GPUs are supported, but some features (e.g., load balancing) may be unavailable.
    • Current GPU drivers installed
  • Render server must have a logged-in user session:
    • The screen can be locked, but a user must remain logged in.

Note that these are recommended requirements.
Depending on model size these can be lower/higher.
Please check with your own models. We don`t recommend going above 40 streams per server

Sample Cloud/OnPrem Setups

These mentions some hardware configuration for the Renderserver on cloud/on-premise. Multiple render servers can be used on one Portal for load balancing.

Oracle

For apx. 8-10 simultaneous streams:
Oracle VM.GPU3.1 / 16GB GPU VRAM. (or 2x VM GPU 2.1 / 2.x) For a even more streams, upscaling to VM.GPU3.x is recommended.

Azure

For apx. 8-10 simultaneous streams:
Min: Standard_NV24s_v3 (16GB VRAM).

Recommended for more streams:
Standard_NV48s_v3 (M60, 32 GB VRAM) or Standard_NV36ads_A10_v5 (24GB VRAM).

AWS

For apx. 8-10 simultaneous streams:
AWS EC2 G3 with 2 GPUs (16GB VRAM). For more streams, an AWS EC2 G5 Instance is recommended (multi-GPUs).

On Prem

Nvidia GPU (e.g. RTX 5000,A4500) 2GB VRAM + 4 GB RAM per stream Min. 8 CPU cores, setup may vary according to use case

Setup Renderservice

Click on Next.

Setup

For installation you need to accept the EULA and click Next.

EULA

Enter a install location or use the default one.

Location

Enter a name for the Watchdog to later identify it. Next enter the UDiTH Portal URL https://<alias/(sub)domain>/Portal and enter the shared secret specified during the Portal installation. If batch mode is enabled no UDiTH windows will be shown during execution. With ignore certificate errors also invalid certificates from the Portal will be accepted.

Setting

Start the installation by clicking Install

StartInstall

Click on finish to start the installation. if the check box is set it will automatically start the render server.

Finish

Security

The user to run Renderserver should be a low privilege user.